HandPunch Network Configuration - Revision history

David: /* HandPunch Network Configuration */

2018-11-29T20:18:42Z

‎HandPunch Network Configuration

Stage: /* HandPunch Network Configuration */

2017-01-22T21:05:17Z

‎HandPunch Network Configuration

David at 20:43, 10 January 2017

2017-01-10T20:43:17Z

David at 20:42, 10 January 2017

2017-01-10T20:42:54Z

Stage at 04:33, 10 January 2017

2017-01-10T04:33:22Z

Stage at 20:36, 9 January 2017

2017-01-09T20:36:05Z

David: /* HandPunch Network Configuration */

2017-01-02T20:42:33Z

‎HandPunch Network Configuration

David: /* HandPunch Network Configuration */

2017-01-02T20:41:06Z

‎HandPunch Network Configuration

Stage at 16:16, 30 December 2016

2016-12-30T16:16:54Z

Stage at 16:09, 30 December 2016

2016-12-30T16:09:43Z

@@ Line 4: / Line 4: @@
 # IP Address, e.g. 192.168.1.50
 # Gateway Address, e.g. 192.168.1.1
-# Subnet Mask or Host Bits, e.g. 255.255.255.0 or 24. Please use this [[Subnet_Mask_To_Host_Bits | table]] to determine the Host Bits if you have the Subnet Mask.
+# Subnet Mask or Host Bits, e.g. 255.255.255.0 or 8. Please use this [[Subnet_Mask_To_Host_Bits | table]] to determine the Host Bits if you have the Subnet Mask.
 Print out this page and then fill in the IP Address, Gateway Address, and Host Bits. Please zero fill each number. For example, 192.168.1.50 should be entered as 192.168.001.050

@@ Line 63: / Line 63: @@
 # Press 2 then Enter.
 # Press No until you see '''SET SERIAL'''. ''Before you press Yes, you must be ready to start entering the IP Address on the next step.'' Press Yes.
-# Enter the IP address. ''Before you press Yes, you must be ready to start entering the Gateway Address on the next step.'' Press Yes.
+# Enter the 12 numbers of the IP address. ''Before you press Yes, you must be ready to start entering the Gateway Address on the next step.'' Press Yes.
-# Enter the Gateway Address.  ''Before you press Yes, you must be ready to start entering the Host Bits on the next step.'' Press Yes.
+# Enter the 12 numbers of the Gateway Address.  ''Before you press Yes, you must be ready to start entering the Host Bits on the next step.'' Press Yes.
 # Enter the Host Bits. Press Yes.
 # The display shows '''9600 baud'''. Press Yes.
 # Press Clear until you are back to the main screen, which reads '''ENTER ID'''.

@@ Line 62: / Line 62: @@
 # You will  see '''ENTER PASSWORD''' in the display.
 # Press 2 then Enter.
-# Press '''No''' until you see '''SET SERIAL'''. ''Before you press Yes, you must be ready to start entering the IP Address on the next step.'' Press Yes.
+# Press No until you see '''SET SERIAL'''. ''Before you press Yes, you must be ready to start entering the IP Address on the next step.'' Press Yes.
 # Enter the IP address. ''Before you press Yes, you must be ready to start entering the Gateway Address on the next step.'' Press Yes.
 # Enter the Gateway Address.  ''Before you press Yes, you must be ready to start entering the Host Bits on the next step.'' Press Yes.

@@ Line 53: / Line 53: @@
 |}
-# From the main screen ('''ENTER ID'''), press Clear then Enter.
-# If you see '''ENTER PASSWORD''' in the display then there are no employees currently enrolled in the HandPunch. Skip to step 7.
+# From the main screen, which reads '''ENTER ID''', press Clear then Enter.
-# You should see a star symbol ('''*''') on the bottom line of the display. If you do not see the '''*''' then go back to step 1.
+# You will see either a star symbol ('''*''') or the text '''ENTER PASSWORD'''.
 # Enter in your Clock ID and press Enter.
 # The displays shows '''PLACE HAND'''. Place your hand.
 # You will  see '''ENTER PASSWORD''' in the display.
 # Press 2 then Enter.
-# Press No (*) until you see '''SET SERIAL'''. Before you press Yes (#) you must be ready to start entering the IP Address on the next step. Press Yes (#).
+# Press '''No''' until you see '''SET SERIAL'''. ''Before you press Yes, you must be ready to start entering the IP Address on the next step.'' Press Yes.
-# Enter the IP address. Before you press Yes (#) you must be ready to start entering the Gateway Address on the next step. Press Yes (#).
+# Enter the IP address. ''Before you press Yes, you must be ready to start entering the Gateway Address on the next step.'' Press Yes.
-# Enter the Gateway Address.  Before you press Yes (#) you must be ready to enter the Host Bits on the next step. Press Yes (#).
+# Enter the Gateway Address.  ''Before you press Yes, you must be ready to start entering the Host Bits on the next step.'' Press Yes.
-# Enter the Host Bits. Press Yes (#) twice.
+# Enter the Host Bits. Press Yes.
-# Press Clear until you are back to the main screen ('''ENTER ID''').
+# The display shows '''9600 baud'''. Press Yes.

@@ Line 12: / Line 12: @@
 |-
 | IP Address
-| style="width: 20pt;height: 20pt" |
+| style="width: 20pt;height: 30pt" |
 | style="width: 20pt;" |
 | style="width: 20pt;" |
@@ Line 31: / Line 31: @@
 |-
 | Gateway Address
-| style="width: 20pt;height: 20pt" |
+| style="width: 20pt;height: 30pt" |
 | style="width: 20pt;" |
 | style="width: 20pt;" |
@@ Line 49: / Line 49: @@
 |-
 | Host Bits
-| style="width: 20pt;height: 20pt" |
+| style="width: 20pt;height: 30pt" |
 |}

@@ Line 6: / Line 6: @@
 # Subnet Mask or Host Bits, e.g. 255.255.255.0 or 24. Please use this [[Subnet_Mask_To_Host_Bits | table]] to determine the Host Bits if you have the Subnet Mask.
-Print out this page and then fill in the IP Address, Gateway Address and Host Bits. Please zero fill each number. For example, 192.168.1.50 should be entered as 192.168.001.050
+Print out this page and then fill in the IP Address, Gateway Address, and Host Bits. Please zero fill each number. For example, 192.168.1.50 should be entered as 192.168.001.050
 {| class='wikitable' cellpadding=15