Difference between revisions of "HandPunch Network Configuration Guide"
From sbv.wiki
(→{{#ireplace:_| |{{#urlget:HandPunch|HandPunch}}}} Configuration) |
|||
(6 intermediate revisions by 2 users not shown) | |||
Line 3: | Line 3: | ||
These are the instructions for entering the network information into the HandPunch. | These are the instructions for entering the network information into the HandPunch. | ||
− | # From the main screen | + | # From the main screen, which reads '''ENTER ID''', press Clear then Enter. |
− | # If you see '''ENTER PASSWORD''' | + | # You will see either a star symbol ('''*''') or the text '''ENTER PASSWORD'''. |
− | # | + | #* If you see '''ENTER PASSWORD''', there are no employees currently enrolled in the HandPunch and you can skip to Step 6. |
+ | #* If you see a star symbol ('''*''') continue from Step 3. | ||
# Enter in your Clock ID and press Enter. | # Enter in your Clock ID and press Enter. | ||
# The displays shows '''PLACE HAND'''. Place your hand. | # The displays shows '''PLACE HAND'''. Place your hand. | ||
# You will see '''ENTER PASSWORD''' in the display. | # You will see '''ENTER PASSWORD''' in the display. | ||
# Press 2 then Enter. | # Press 2 then Enter. | ||
− | # Press No | + | # Press No until you see '''SET SERIAL'''. ''Before you press Yes, you must be ready to start entering the IP Address on the next step.'' Press Yes. |
− | # Enter '''{{#ireplace:_|<nowiki> </nowiki>|{{#urlget:IpAddress| | + | # Enter '''{{#ireplace:_|<nowiki> </nowiki>|{{#urlget:IpAddress|010_001_009_091}}}}'''. ''Before you press Yes, you must be ready to start entering the Gateway Address on the next step.'' Press Yes. |
− | # Enter '''{{#ireplace:_|<nowiki> </nowiki>|{{#urlget:GatewayAddress| | + | # Enter '''{{#ireplace:_|<nowiki> </nowiki>|{{#urlget:GatewayAddress|010_001_009_001}}}}'''. ''Before you press Yes, you must be ready to enter the Host Bits on the next step.'' Press Yes. |
− | # Enter '''{{#urlget:HostBits| | + | # Enter '''{{#urlget:HostBits|8}}'''. Press Yes. |
− | # Press Clear until you are back to the main screen | + | # The display shows '''9600 baud'''. Press Yes. |
+ | # Press Clear until you are back to the main screen, which reads '''ENTER ID'''. | ||
+ | |||
+ | |||
+ | Call {{#urlget:Employee|Support}} if you have questions at 914-777-2121 x3 |
Latest revision as of 15:20, 28 June 2017
HandPunch Configuration
These are the instructions for entering the network information into the HandPunch.
- From the main screen, which reads ENTER ID, press Clear then Enter.
- You will see either a star symbol (*) or the text ENTER PASSWORD.
- If you see ENTER PASSWORD, there are no employees currently enrolled in the HandPunch and you can skip to Step 6.
- If you see a star symbol (*) continue from Step 3.
- Enter in your Clock ID and press Enter.
- The displays shows PLACE HAND. Place your hand.
- You will see ENTER PASSWORD in the display.
- Press 2 then Enter.
- Press No until you see SET SERIAL. Before you press Yes, you must be ready to start entering the IP Address on the next step. Press Yes.
- Enter 010 001 009 091. Before you press Yes, you must be ready to start entering the Gateway Address on the next step. Press Yes.
- Enter 010 001 009 001. Before you press Yes, you must be ready to enter the Host Bits on the next step. Press Yes.
- Enter 8. Press Yes.
- The display shows 9600 baud. Press Yes.
- Press Clear until you are back to the main screen, which reads ENTER ID.
Call Support if you have questions at 914-777-2121 x3