Employee Clock Info

From sbv.wiki
Revision as of 17:33, 4 July 2019 by Stage (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


The Clock Info tab is where the employee is associated with a clock ID that the employee uses at one or more of the time clocks.


Clock ID – A popup screen appears where you enter the Clock ID. You cannot leave this screen until the clock ID is validated.

Assigned Time Clocks – the time clocks that the employee can use. By default, all time clocks are selected. If additional time clocks are added to the system, an employee that has all clocks currently assigned will automatically be assigned to the new time clocks, but an employee who was assigned to only some clocks will not be assigned to newly added clocks.

Time Clock Supervisor – if the employee performs supervisor functions at the time clocks, select this option.

No Biometric Verification – If employee cannot punch because they cannot place their hand flat on the Time Clock to make the lights go out (injury, something about their hand limits their movement, missing finger) then you use this option.

HandPunch Threshold – a value of 0 uses the global threshold level of the HandPunch. This allows an individual employee to have a higher threshold to accommodate punching problems.

Punching Zone – available only with the HP4000, this restricts the employee to punching within zones.

Override Time Clock Assignments – If system is set to use specific time clocks for specific labor levels, the system will automatically assign time clocks accordingly. Use this settings to override the labor level time clock assignments.

See also