Difference between revisions of "HandPunch Network Configuration Guide"
From sbv.wiki
m (Stage moved page HandPunch Network Configuration StepByStep to HandPunch Network Configuration Guide without leaving a redirect) |
|||
Line 1: | Line 1: | ||
− | {{#urlget: | + | == {{#urlget:HandPunch|HandPunch}} Network Configuration Guide == |
− | + | These are the instructions for entering the network information into the HandPunch. | |
− | + | # From the main screen ('''ENTER ID'''), press Clear then Enter. | |
− | + | # If you see '''ENTER PASSWORD''' in the display then there are no supervisors currently enrolled in the HandPunch. Skip to step 6. | |
− | + | # You should see a star symbol ('''*''') on the bottom line of the display. If you do not see the '''*''' then go back to step 1. | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | # From the main screen (ENTER ID), press Clear then Enter. | + | |
− | # You should | + | |
# Enter in your Clock ID and press Enter. | # Enter in your Clock ID and press Enter. | ||
− | # The displays shows PLACE HAND. Place your hand. | + | # The displays shows '''PLACE HAND'''. Place your hand. |
− | # You | + | # You will see '''ENTER PASSWORD''' in the display. |
− | # Press 2 then | + | # Press 2 then Enter. |
− | # | + | # Press No (*) until you see '''SET SERIAL'''. Before you press Yes (#) you must be ready to start entering the IP Address on the next step. Press Yes (#). |
− | + | # Enter ''{{#urlget:IpAddress|192.168.001.099}}''. Before you press Yes (#) you must be ready to start entering the Gateway Address on the next step. Press Yes (#). | |
− | # | + | # Enter ''{{#urlget:GatewayAddress|192.168.001.001}}''. Before you press Yes (#) you must be ready to enter the Host Bits on the next step. Press Yes (#). |
− | # Enter | + | # Enter ''{{#urlget:HostBits|24}}''. Press Yes (#) twice. |
− | # | + | # Press Clear until you are back to the main screen ('''ENTER ID'''). |
− | # | + |
Revision as of 16:24, 30 December 2016
HandPunch Network Configuration Guide
These are the instructions for entering the network information into the HandPunch.
- From the main screen (ENTER ID), press Clear then Enter.
- If you see ENTER PASSWORD in the display then there are no supervisors currently enrolled in the HandPunch. Skip to step 6.
- You should see a star symbol (*) on the bottom line of the display. If you do not see the * then go back to step 1.
- Enter in your Clock ID and press Enter.
- The displays shows PLACE HAND. Place your hand.
- You will see ENTER PASSWORD in the display.
- Press 2 then Enter.
- Press No (*) until you see SET SERIAL. Before you press Yes (#) you must be ready to start entering the IP Address on the next step. Press Yes (#).
- Enter 192.168.001.099. Before you press Yes (#) you must be ready to start entering the Gateway Address on the next step. Press Yes (#).
- Enter 192.168.001.001. Before you press Yes (#) you must be ready to enter the Host Bits on the next step. Press Yes (#).
- Enter 24. Press Yes (#) twice.
- Press Clear until you are back to the main screen (ENTER ID).