Difference between revisions of "HandPunch Network Configuration Guide"
From sbv.wiki
(→{{#ireplace:_| |{{#urlget:HandPunch|HandPunch}}}} Configuration) |
|||
Line 11: | Line 11: | ||
# Press 2 then Enter. | # Press 2 then Enter. | ||
# Press No (*) until you see '''SET SERIAL'''. Before you press Yes (#) you must be ready to start entering the IP Address on the next step. Press Yes (#). | # Press No (*) until you see '''SET SERIAL'''. Before you press Yes (#) you must be ready to start entering the IP Address on the next step. Press Yes (#). | ||
− | # Enter '''{{#ireplace:_|<nowiki> </nowiki>|{{#urlget:IpAddress| | + | # Enter '''{{#ireplace:_|<nowiki> </nowiki>|{{#urlget:IpAddress|010_001_009_091}}}}'''. Before you press Yes (#) you must be ready to start entering the Gateway Address on the next step. Press Yes (#). |
− | # Enter '''{{#ireplace:_|<nowiki> </nowiki>|{{#urlget:GatewayAddress| | + | # Enter '''{{#ireplace:_|<nowiki> </nowiki>|{{#urlget:GatewayAddress|010_001_009_001}}}}'''. Before you press Yes (#) you must be ready to enter the Host Bits on the next step. Press Yes (#). |
− | # Enter '''{{#urlget:HostBits| | + | # Enter '''{{#urlget:HostBits|8}}'''. Press Yes (#) twice. |
# Press Clear until you are back to the main screen ('''ENTER ID'''). | # Press Clear until you are back to the main screen ('''ENTER ID'''). |
Revision as of 20:53, 9 January 2017
HandPunch Configuration
These are the instructions for entering the network information into the HandPunch.
- From the main screen (ENTER ID), press Clear then Enter.
- If you see ENTER PASSWORD in the display then there are no employees currently enrolled in the HandPunch. Skip to step 6.
- You should see a star symbol (*) on the bottom line of the display. If you do not see the * then go back to step 1.
- Enter in your Clock ID and press Enter.
- The displays shows PLACE HAND. Place your hand.
- You will see ENTER PASSWORD in the display.
- Press 2 then Enter.
- Press No (*) until you see SET SERIAL. Before you press Yes (#) you must be ready to start entering the IP Address on the next step. Press Yes (#).
- Enter 010 001 009 091. Before you press Yes (#) you must be ready to start entering the Gateway Address on the next step. Press Yes (#).
- Enter 010 001 009 001. Before you press Yes (#) you must be ready to enter the Host Bits on the next step. Press Yes (#).
- Enter 8. Press Yes (#) twice.
- Press Clear until you are back to the main screen (ENTER ID).