Difference between revisions of "HandPunch Network Configuration Guide"

Latest revision as of 15:20, 28 June 2017

HandPunch Configuration

These are the instructions for entering the network information into the HandPunch.

1. From the main screen, which reads ENTER ID, press Clear then Enter.
2. You will see either a star symbol (*) or the text ENTER PASSWORD.
   • If you see ENTER PASSWORD, there are no employees currently enrolled in the HandPunch and you can skip to Step 6.
   • If you see a star symbol (*) continue from Step 3.
3. Enter in your Clock ID and press Enter.
4. The displays shows PLACE HAND. Place your hand.
5. You will see ENTER PASSWORD in the display.
6. Press 2 then Enter.
7. Press No until you see SET SERIAL. Before you press Yes, you must be ready to start entering the IP Address on the next step. Press Yes.
8. Enter 010 001 009 091. Before you press Yes, you must be ready to start entering the Gateway Address on the next step. Press Yes.
9. Enter 010 001 009 001. Before you press Yes, you must be ready to enter the Host Bits on the next step. Press Yes.
10. Enter 8. Press Yes.
11. The display shows 9600 baud. Press Yes.
12. Press Clear until you are back to the main screen, which reads ENTER ID.

Call Support if you have questions at 914-777-2121 x3