Difference between revisions of "HandPunch Network Configuration"
From sbv.wiki
(→HandPunch Network Configuration) |
|||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 4: | Line 4: | ||
# IP Address, e.g. 192.168.1.50 | # IP Address, e.g. 192.168.1.50 | ||
# Gateway Address, e.g. 192.168.1.1 | # Gateway Address, e.g. 192.168.1.1 | ||
| − | # Subnet Mask or Host Bits, e.g. 255.255.255.0 or | + | # Subnet Mask or Host Bits, e.g. 255.255.255.0 or 8. Please use this [[Subnet_Mask_To_Host_Bits | table]] to determine the Host Bits if you have the Subnet Mask. |
Print out this page and then fill in the IP Address, Gateway Address, and Host Bits. Please zero fill each number. For example, 192.168.1.50 should be entered as 192.168.001.050 | Print out this page and then fill in the IP Address, Gateway Address, and Host Bits. Please zero fill each number. For example, 192.168.1.50 should be entered as 192.168.001.050 | ||
| Line 53: | Line 53: | ||
|} | |} | ||
| − | # From the main screen | + | |
| − | # If you see '''ENTER PASSWORD''' | + | # From the main screen, which reads '''ENTER ID''', press Clear then Enter. |
| − | # | + | # You will see either a star symbol ('''*''') or the text '''ENTER PASSWORD'''. |
| + | #* If you see '''ENTER PASSWORD''', there are no employees currently enrolled in the HandPunch and you can skip to Step 6. | ||
| + | #* If you see a star symbol ('''*'''), continue the login process with Step 3. | ||
# Enter in your Clock ID and press Enter. | # Enter in your Clock ID and press Enter. | ||
# The displays shows '''PLACE HAND'''. Place your hand. | # The displays shows '''PLACE HAND'''. Place your hand. | ||
# You will see '''ENTER PASSWORD''' in the display. | # You will see '''ENTER PASSWORD''' in the display. | ||
# Press 2 then Enter. | # Press 2 then Enter. | ||
| − | # Press No | + | # Press No until you see '''SET SERIAL'''. ''Before you press Yes, you must be ready to start entering the IP Address on the next step.'' Press Yes. |
| − | # Enter the IP address. Before you press Yes | + | # Enter the 12 numbers of the IP address. ''Before you press Yes, you must be ready to start entering the Gateway Address on the next step.'' Press Yes. |
| − | # Enter the Gateway Address. Before you press Yes | + | # Enter the 12 numbers of the Gateway Address. ''Before you press Yes, you must be ready to start entering the Host Bits on the next step.'' Press Yes. |
| − | # Enter the Host Bits. Press Yes | + | # Enter the Host Bits. Press Yes. |
| − | # Press Clear until you are back to the main screen | + | # The display shows '''9600 baud'''. Press Yes. |
| + | # Press Clear until you are back to the main screen, which reads '''ENTER ID'''. | ||
Latest revision as of 20:18, 29 November 2018
HandPunch Network Configuration
These are the instructions for entering the network information into a HandPunch with an internal network card. You need the following network information:
- IP Address, e.g. 192.168.1.50
- Gateway Address, e.g. 192.168.1.1
- Subnet Mask or Host Bits, e.g. 255.255.255.0 or 8. Please use this table to determine the Host Bits if you have the Subnet Mask.
Print out this page and then fill in the IP Address, Gateway Address, and Host Bits. Please zero fill each number. For example, 192.168.1.50 should be entered as 192.168.001.050
| IP Address | . | . | . |
| |||||||||||
| Gateway Address | . | . | . | ||||||||||||
| Host Bits |
- From the main screen, which reads ENTER ID, press Clear then Enter.
- You will see either a star symbol (*) or the text ENTER PASSWORD.
- If you see ENTER PASSWORD, there are no employees currently enrolled in the HandPunch and you can skip to Step 6.
- If you see a star symbol (*), continue the login process with Step 3.
- Enter in your Clock ID and press Enter.
- The displays shows PLACE HAND. Place your hand.
- You will see ENTER PASSWORD in the display.
- Press 2 then Enter.
- Press No until you see SET SERIAL. Before you press Yes, you must be ready to start entering the IP Address on the next step. Press Yes.
- Enter the 12 numbers of the IP address. Before you press Yes, you must be ready to start entering the Gateway Address on the next step. Press Yes.
- Enter the 12 numbers of the Gateway Address. Before you press Yes, you must be ready to start entering the Host Bits on the next step. Press Yes.
- Enter the Host Bits. Press Yes.
- The display shows 9600 baud. Press Yes.
- Press Clear until you are back to the main screen, which reads ENTER ID.
