HandPunch Network Configuration
From sbv.wiki
HandPunch Network Configuration
These are the instructions to enter the network information into the HandPunches with internal network cards. You need the following network information:
- IP Address
- Gateway Address
- Subnet Mask or Host Bits
IP Address | . | . | . | ||||||||||||
Gateway Address | . | . | . | ||||||||||||
Subnet Mask | . | . | . |
- From the main screen (ENTER ID), press Clear then Enter.
- If you see ENTER PASSWORD in the display then there are no supervisors currently enrolled in the HandPunch. Skip to the next step, otherwise a supervisor should enter their ID and place their hand.
- You should see ENTER PASSWORD in the display.
- Press No (*) until you see SET SERIAL then press Yes (#).
Subnet Mask | Host Bits |
---|---|
255.255.255.255 | 0 |
255.255.255.254 | 1 |
255.255.255.252 | 2 |
255.255.255.248 | 3 |
255.255.255.240 | 4 |
255.255.255.224 | 5 |
255.255.255.192 | 6 |
255.255.255.128 | 7 |
255.255.255.0 | 8 |
255.255.254.0 | 9 |
255.255.252.0 | 10 |
255.255.248.0 | 11 |
255.255.240.0 | 12 |
255.255.224.0 | 13 |
255.255.192.0 | 14 |
255.255.128.0 | 15 |
255.255.0.0 | 16 |
255.254.0.0 | 17 |
255.252.0.0 | 18 |
255.248.0.0 | 19 |
255.240.0.0 | 20 |
255.224.0.0 | 21 |
255.192.0.0 | 22 |
255.128.0.0 | 23 |
255.0.0.0 | 24 |